Driveway Gates Kent: Vetted Installers, Free Site Surveys
Connecting Kent homeowners with specialist gate installers across the county. From Sevenoaks to Canterbury, Dartford to Folkestone. Three free quotes, no obligation, no cost to you.
Three Steps to Your Kent Gate Installer
No searching, no cold calls, no sales pressure. Tell us what you need and we handle the rest.
Describe Your Project
Your Kent postcode, the type of gate, and a rough budget. Takes under two minutes. We use this to identify the right specialists for your site, your property type, and your specification.
Meet Your Matched Installers
Up to three vetted gate specialists contact you to arrange free site visits. They assess the driveway, check planning if relevant, and provide detailed written quotes with no obligation attached.
Compare and Choose
Three independent quotes, each based on a physical survey of your property. Compare on your terms. Proceed when you are ready, or not at all. There is no fee to you at any stage of this process.
Free for homeowners. No fees. No obligation.
Most Kent Gate Problems Start With the Wrong Installer
A general builder who occasionally installs a gate is not the same thing as a gate specialist. The difference shows in the foundation depth, the motor sizing, the surface treatment specification, and the safety commissioning. It shows in whether the installer knows that a property in the North Downs AONB faces different planning rules from one in Dartford, or that a steel gate half a mile from the Whitstable seafront needs marine-grade powder coat rather than a standard formulation.
Kent is a county where these details matter more than most. The terrain varies from the chalk ridge of the North Downs to the clay hills of the Weald. The planning landscape involves two Areas of Outstanding Natural Beauty, Green Belt along the M25 corridor, conservation areas in every historic town, and twelve separate district councils. The property types run from medieval timber-frame houses in Canterbury to modern estates in Dartford. Getting the specification right for each context is not something a generalist does well.
Every installer in our network does gate work as their primary trade, has completed at least 50 residential installations, carries full public liability insurance, and provides written warranties on both the gate and the automation. We match you with up to three who cover your area and have the right experience for your project. You compare their quotes and decide.
Electric Gates, Wooden Gates, Metal Gates: Kent Specialists for Each
Whether you need a sliding gate for a steep North Downs driveway or a hardwood gate for a Wealden farmhouse, we have the right specialist.
Electric Sliding Gates
The go-to solution for driveways where swing clearance is restricted. Sliding gates travel horizontally on a ground track or cantilever rail, handling wide openings and steep approaches that swing gates cannot manage.
Find Kent installers
Electric Swing Gates
The most popular gate type on residential Kent driveways. A single or double leaf gate driven by underground or ram-arm motors, combining traditional presence with modern automated convenience.
Find Kent installersWooden Driveway Gates
Bespoke hardwood gates crafted to specification in iroko, European oak, or Accoya. The natural choice for oast houses, barn conversions, Wealden farmhouses, and rural properties where character matters as much as security.
Find Kent installersMetal Driveway Gates
Fabricated steel, aluminium, and wrought iron gates built for decades of service. From hand-forged ornate ironwork on Sevenoaks estate properties to precision-cut contemporary aluminium on modern North Kent builds.
Find Kent installers
Automated Gate Systems
Complete automation packages for new and existing gates. Motors, safety systems, video intercom, keypad and proximity access, smart home integration, and battery backup as standard.
Find Kent installers
Gate Repair and Maintenance
Diagnostic callouts, motor replacement, hinge realignment, safety sensor calibration, and annual service contracts across Kent. Most faults resolved on the first visit.
Find Kent installersGates for the Garden of England: Every Kent Property Type
Kent's residential stock is unusually varied. The right gate specification depends as much on the building's character as on your personal preference.
Oast Houses and Barn Conversions
The Wealden landscape between Paddock Wood and Tenterden is dotted with converted oast houses and agricultural barns. European oak or iroko, close-boarded or open-framed to suit the boundary, is the instinctive specification. Our High Weald AONB installers know what works.
Victorian and Edwardian Commuter Belt
The period housing stock across Sevenoaks, Tunbridge Wells, and Tonbridge calls for gates with heritage character. Wrought iron or fabricated steel with traditional profiles, on brick piers with underground motors concealed below.
Coastal East Kent Properties
Between Whitstable and Folkestone, salt air changes the specification entirely. Aluminium for zero corrosion, Accoya for salt-resistant timber, marine-grade powder coat on any steel. Coastal installers know the requirements.
Canterbury Conservation Area
The historic core of Canterbury and surrounding villages carry conservation designations that affect boundary treatments. Gate material and design need to respect the street scene. Our Canterbury-area installers handle this regularly.
Modern Builds in North Kent
New-build estates across Dartford, Gravesend, and the Ebbsfleet corridor suit clean-lined aluminium sliding gates or fabricated steel in anthracite. Practical, low-maintenance, and fully automated.
Premium West Kent Estates
Sevenoaks, Westerham, and the Tunbridge Wells belt produce some of the highest-specification gate installations in the South East. Hand-forged wrought iron, underground motors, video intercom, and proximity access.
West Kent: Sevenoaks, Westerham, Edenbridge, Tunbridge Wells
London commuter wealth, North Downs AONB and Green Belt overlap, premium wrought iron and concealed automation
The Weald: Cranbrook, Goudhurst, Tenterden, Hawkhurst
High Weald AONB, oast houses, farmsteads, barn conversions. Bespoke hardwood the dominant specification
North Kent: Dartford, Gravesend, Swanley, Meopham
M25 commuter belt, contemporary and period mix. Sliding and swing automation, practical specifications
Mid Kent: Maidstone, Bearsted, West Malling, Lenham
County town and garden villages. Bespoke metal and hardwood across a range of property ages and styles
East Kent Coast: Canterbury, Whitstable, Faversham, Deal, Folkestone
Historic conservation areas, medieval listed buildings, coastal exposure demanding marine-grade specification
Two AONBs. Twelve Districts. One Coast. Kent Demands Local Knowledge.
The North Downs AONB traces the chalk escarpment from the Surrey border through Sevenoaks, past Wrotham Hill, and onward to the coast above Folkestone. The High Weald AONB covers the rolling clay hills through Cranbrook, Goudhurst, and Lamberhurst. Green Belt wraps the M25 corridor through the Sevenoaks and Dartford districts. Conservation areas exist in Canterbury, Faversham, Tenterden, Sandwich, and in villages right across the county.
Add twelve separate district planning authorities, each with its own policies on boundary treatments, and you have a planning landscape that rewards experience and punishes assumptions. An installer who knows Kent will identify the relevant designation at postcode level, advise on whether a pre-application enquiry makes sense, and design a gate that the planning authority is likely to accept.
Then there is the physical landscape. North Downs properties sit on chalk with steep gradients that need specific hinge and motor engineering. The Weald sits on clay that behaves differently under foundation loads. The coast brings salt air corrosion that inland specification does not account for. Our network installers work across all of these conditions and adjust their specification for each one.
Driveway Gate Installers Near You in Kent
75 towns covered across every part of the county. Select your area to see what is available locally.
Kent Driveway Gate Prices: What Installations Actually Cost in 2026
Real prices from completed Kent projects. West Kent runs higher than the national average; North and East Kent are closer to it. Every figure includes full installation.
Electric Sliding Gates (Fully Installed)
£4,800 to £12,500
Gate + motor + track + remotes · 3 to 5 days
Full installation covering gate fabrication, concrete track or cantilever foundation, rack-and-pinion motor, two remote handsets, and calibrated safety photocells. Higher end reflects cantilever systems, wider openings, or premium materials. A precise figure requires a site survey.
Electric Swing Gates (Fully Installed)
£3,800 to £11,500
Gate + motor + posts + remotes · 2 to 4 days
Covers gate fabrication or supply, post foundations, underground or ram-arm motors, two remote handsets, and BS EN 12453 compliant safety sensors. Underground motors and bespoke wrought iron designs sit toward the top of the range. The most widely installed gate type across Kent.
Wooden Driveway Gates (Installed)
£2,800 to £8,500
Bespoke timber + hardware · 2 to 4 days
Bespoke hardwood gates in iroko, European oak, or Accoya, hung on hot-dip galvanised ironmongery with a quality locking system. Price varies with timber species, panel design, and gate dimensions. Automation can be added from £1,400 and is specified after the gate weight is confirmed.
Metal Driveway Gates (Installed)
£3,000 to £9,500
Fabricated + galvanised + coated · 2 to 4 days
Bespoke mild steel, aluminium, or wrought iron gates, shot-blasted, hot-dip galvanised, and powder-coated in any RAL colour. Includes posts, hinges, and lock. Wrought iron and laser-cut designs sit at the higher end. Automation available as a separately quoted addition from £1,400.
Gate Automation Retrofit
£1,400 to £3,800
Motor + safety + remotes · 1 to 2 days
Adds electric operation to existing manual gates that are structurally sound and correctly hung. Includes motor, control board, safety photocells, and two remote handsets. Video intercom, keypad, or smartphone control modules available as additions. Price determined by gate weight, type, and access control specification.
Gate Repair and Servicing
£120 to £750
Callout + labour + parts · Same day to 2 days
Covers diagnostic callouts, motor and control board repair or replacement, hinge realignment, safety sensor recalibration, intercom faults, and remote reprogramming. Annual service packages covering all mechanical and electronic elements available from most Kent engineers in our network.
0% Finance From £99 Per Month
Available through most Kent installers in our network. Spread the cost over 6 to 36 months with nothing to pay upfront at many providers. Subject to status.
What You Get From Our Free Matching Service
We are not a gate company. We are the filter between you and the county's best gate installers.
Minimum 50 Installs
No one enters our Kent network without a verified track record. Every installer has completed at least 50 residential gate projects before they receive a single referral from us.
Insured, Warranted, Tested
Public liability insurance, separate written warranties for gate and automation, and BS EN 12453 safety commissioning with force testing documented at handover. Non-negotiable.
Matched to Your Area
A coastal Folkestone project and a Sevenoaks estate entrance need different experience. We match by location and project type, not just availability.
Still There in Five Years
We refer established businesses, not sole traders who might not be around when you need a service or warranty call. Longevity and responsiveness are part of our ongoing assessment.
“We needed gates that would sit comfortably within the North Downs AONB without drawing objections. The installer specified iroko swing gates with underground motors and managed the whole project from design through to commissioning. The result looks as though it has always been there, which is exactly what we wanted.”
“Our conservation area property needed a gate that respected the street scene while providing genuine security. The fabricator produced hand-forged ironwork that matched the period railings perfectly and the installer handled the listed building consent paperwork alongside us. Exceptional attention to detail throughout.”
“Steep driveway in the High Weald that two previous companies said could not take automated gates. The installer specified a cantilever sliding system that cleared the gradient completely. It has run without a fault for over a year and the neighbours keep asking who fitted it.”
Driveway Gates Kent: Your Questions Answered
Get Matched With Kent Gate Installers Today
Two minutes is all it takes. Tell us what you need and we connect you with up to three vetted specialists for free site surveys and written quotes. No fees, no obligation, no pressure.